Move the mouse to view larger image
These valves may be used to manually shift the spool position and change the direction of oil flow.
一、Specifications
1. Varies depending on the spool type. For details, see the "List of Standard Model and Maximum Flows" for DSG-03 Series Solenoid Operated Directional Valves (page 364 and 366 at 50 Hzrated voltage).
2. The figures in parentheses indicate Max. flow for 3C3,3C5, 3C6 and 3C60.
3.Varies depending on the spool type. For the details, see the table in the following page.
4. Varies depending on the spool type. Same as DSHG-10 (at pilot pressure of 1.5 MPa (220 PSI).
5. Lever operating torque varies depends on the T-line back pressure. See the right-hand figure.
6. If the T-Line back pressure exceeds 7 MPa (1020 PSI), directly connect the drain port to the reservoir.
二、Model Number Designation
三、Sub-plates
Sub-plates are available. Specify the sub-plate model number from the table above.When sub-plates are not used, the mounting surface should have a good machined finish.
四、Instructions
Avoid connecting the Tank Port "T" to a line with possible surge pressure.
Notes: Please call our company telephone 021-67687301, 67687302 to buy "Manually Operated Directional Valves" products. Browse this webpage carefully to know more about Manually Operated Directional Valves.